Shenzhen Photon Broadband Tech Co., Ltd. -Reverse Optical Receiver Module

Reverse Optical Receiver Module

PTR6004D

1. Overview

ThePTR6004D reverse receiver module occupies one slot of thePTP3001D rack. It has the function of independent four-channel reverse optical receiver. One rack can be installed with 18 receiver modules, supporting 72-channel input of optical signals and 72-channel output of RF signals at the same time, with high installation density. The front panel is provided with status indicator, RF test port, and optical input port; the rear panel is provided with blind-mate F-type quick connector and power/signal connector, which is convenient for installation and maintenance.

2. Features

Ø Test port onthe front panel F connector

Ø Microprocessor control and monitor

Ø 5-204MHz MHz bandwidth

Optical Indicators

Wavelength	1290. -1600 nm
Reflection loss	40dB (minimum)
Optical connector	SC/APC (4 Nr.)
Input optical power	-18-+1dBm

RFindicators

Frequency bandwidth	5-204MHz
Output signal level	30dBmV/ch (@-18-+1dBm optical input)
Optical AGC control	-18 - +1dBm
Reflection loss of output	≥16dB
Flatness	±0.75 dB
Signal level of test port	20±1 dB (compared to the RF output port)
RF port	Test portF (British system) type quick connector receptacle (on the front panel) RF output portF (British system) type quick connecting base (on the rear panel)
Connecting port of power supply/signal	Connector of power supply/signal
Link indicators	NPR ≥ 40dB/ dynamical range NPR ≥ 20dB (5 - 60MHz test of white noise)

GeneralIndicators

Dimension	118.5mm (height) × 22mm (width) × 441.4mm (depth)
Weight	0.75Kg
Power consumption	≤ 15W
Installation mode	Plug-ins ofPTP3001D rack module
Eye protection	Protective cover of optical security
Status indication	Two-color status indication on the front panel (green: normal, red: alarm)
Status monitoring	Local or SNMP remote monitoring ofPTP3001D-CM network management control module
Operating temperature range	-20°C - +50°C (-4°F - +122°F)
Storage temperature range	-40°C - +85°C (-40°F - +186°F)
Relative humidity	15 - 95% (non-condensing)
Status indication	Two-color status indication on the front panel (green: normal, red: alarm)
Status monitoring	Local or SNMP remote monitoring ofPTP3001D-CM network management control module
Operating temperature range	-20°C-+50°C（-4°F-+122°F）
Storage temperature range	-40°C-+85°C（-40°F-+186°F）
Relative humidity	15 - 95% (non-condensing)

Note: test of loss shall be carried out on cables with data rate of at least 10KM and optical attenuator, and optical receiver module has a input of -6dBm. Infuse 5 - 50MHz white noise.