E-mail：monica_lei@pbbcom.com | Tel：+86 755 8614 9811
Optical Transmission Platform
PTP3001D
1. Overview
The PTP3001D optical transmission platform is a broadband transmission platform of hybrid fiber-coax (HFC) network, i.e. a combination of an optical fiber cable transmission system and a coax cable distribution network. The PTP3001D optical transmission platform can be used in a very flexible manner. It contains a series of optional modules and users can select various module combinations according to requirements of their own system.
2. Features
Ø ThePTP3001D rack can be equipped with differentPTP3001D application modules at the same time.
Ø It provides positions for installation of 18 modules with a 19‘ standard width rack.
Ø OnePTP3001D-CM network management control module is mounted in the right slot (19#) of the rack.
Ø Two AC-DC power modules (or DC-DC power modules) are respectively mounted in two slots on the top of the rear panel of the rack.
Ø It provides interconnection between the common power and all the modules.
Ø It provides interconnection between the network management control module and other modules to fulfill digital communication in the rack and interconnection between such modules and the external status monitor and network management system.Compatible with 1 U rack installation
1. Parameters
|
AC input voltage |
105-264VAC@47-63Hz |
|
Installed modules |
2 power supply modules, 1 network management control module, 18 application modules. |
|
Status Indication |
Air fan status of control module is independently displayed (green: normal, red: alarm). |
|
Network management |
RJ45 10BaseT Ethernet port, and it is on the rear panel ofPTP3001D. |
|
RF connector receptacle |
F-type quick connector receptacle, and it is on the rear panel ofPTP3001D. |
2. Generalindicators
|
Dimension |
483Mm (width) × 133 mm (height) × 500mm (depth) |
|
Weight ofempty rack |
6Kg |
|
Power consumption |
360W |
|
Installation mode |
Standard 19 inches, 3U rack. |
|
Status indication |
Two-color status indication on the front panel of control module (green: normal, red: alarm) |
|
Status monitoring |
Local or SNMP remote monitoring ofPTP3001D-CM network management control module |
|
Operating temperature |
-20°C-+50°C（-4°F-+122°F） |
|
Storage temperature |
-40°C-+85°C（-40°F-+185°F） |
|
Relative humidity |
15 - 95% (non-condensing) |
Technical Indicators
|
IP port |
Standard RJ45 |
|
Data rate |
10/100M self-adapting |
|
Display screen |
4.3’’ (480×272) TFT LED touch screen |
|
Communication protocol |
Standard SNMP protocol |
|
Data format |
RFC and American standard MIB |
|
Alarm mode |
Buzzer, flashing and changing of icon |
Generalindicators
|
Dimension |
121mm (height) x 22 (width) mm x 438.6mm (depth) |
|
Weight |
0.95Kg |
|
Power consumption |
2W |
|
Installation mode |
Special plug-ins forPTP3001D rack |
|
Status indication |
Two-color status indication on the front panel (green: normal, red: alarm) |
|
Status monitoring |
Local or SNMP remote monitoring ofPTP3001D-CM network management control module |
|
Operating temperature range |
-20℃-+50℃ （-4°F-+122°F） |
|
Storage temperature range |
-40℃-+85℃ （-40°F-+185°F） |
|
Relative humidity |
15 - 95% (non-condensing) |
Technical Indicators
|
Operating voltage |
150-265VAC@47-63Hz |
|
Output voltage stability |
0.5% |
|
Load stability |
≤2% |
|
Ripple and noise (resistive load) |
Vpp ≤ output voltage x 0.5% |
|
Protection function
|
a.Overload protection130% b.Over-voltage protection130% c.Short-circuit protectionthe output voltage is near 0V, clear faults, and normal functioning is recovered. d.Over-heat protection overheat protection e.Delayed slow start after AC is connected, power supply starts after T (500ms≤T≤2s). |
|
Insulating strength |
Input end and ground, input end and output end: AC1.5KV 5mA; output end and ground: AC0.5KV 5mA; insulation resistance > 50megohm. |
|
Mean time between failures |
≥ 10,000 hours |
|
Power factor |
≥0.9 (load ≥ 30%) |
|
Limit working parameter
|
Operating voltage: +12Vdc Minimum working current (A): 0.4A Maximum working current (A): 30A |
General indicators
|
Dimension |
164mm (length) × 42mm (width) × 202mm (depth) |
|
Weight |
1Kg |
|
Power consumption (maximum output power) |
360W |
|
Installation mode |
Plug-ins forPTP3001D rack |
|
Status indication |
Two-color status indication on the front panel of network management control module (green: normal, red: alarm) |
|
Status monitoring |
Local or SNMP remote monitoring ofPTP3001D-CM network management control module |
|
Operating temperature range |
-20°C-+50°C（-4°F-+122°F） |
|
Storage temperature range |
-40°C-+85°C（-40°F-+185°F） |
|
Relative humidity |
15 - 95% (non-condensing) |
