E-mail：monica_lei@pbbcom.com | Tel：+86 755 8614 9811
High-Power Optical Amplifier
PTA5102YWR-16
Overview：
The PTA5102YWR-16 Ytterbium and Erbium Doped Fiber Amplifiers (YEDFA) are designed for FTTX and HFC application. They have built-in 1550nm transmitter that can add local RF signals to 1550 optical link without converting optical signal into RF, optimized for 1550nm wavelength amplification and application, and are packaged in a 2U 19 inch rack housing. The device chooses a high performance PUMP laser and advanced circuits (including ACC and APC), adjustable output optical power to achieve flexible network link loss budget, which are flexible enough meet all the requirements of FTTX and HFC applications. The PTA5102YWR-16 YEDFA also provide monitors and associated alarms for all vital characteristics. The status and management of the device can be monitored and managed either from the LCD front panel display & Web or remotely via Ethernet based-SNMP NMS. The device also supports multiple optical output by build-in PLC splitter and FWDM (1310nm/1490nm) optical multiplexer for Triple-play FTTX network applications.
Features：
Ø Standard 19 inch 2U Rack YEDFA
Ø 16 output ports with WDM
Ø Built-in 1550nm Transmitter for local RF signal input
Ø Output powers rang from 16*16, 16*19, 16*22dBm
Ø Output optical power adjustable -3~0dB
Ø Wide input dynamic range(0 to +10dBm)
Ø High Isolation input & output(30dB for max)
Ø Web browser management
Ø Automatic Power Control (APC) or Automatic Current Control (ACC)
Ø LCD front panel display for local monitor
Ø Remote management via SNMP (Ethernet Interface)
| Description | Unit | Value | Conditions / Notes |
| EDFA Optical Specifications | |||
| Fiber Connector | nm | TV input:1550nm COM:1550/1490/1310nm SC/APC or FC/APC | OLT:1310/1490nm SC/UPC |
| Optical Wavelength | nm | 1540 ~1560 |
|
| Input Power | dBm | +3~+10 (1550nm) | Recommend ≥5dBm |
| Output Power | dBm | 16*16 16*19 16*22 |
|
| Laser Bias Current | Pump | 16*16dBm 3300mA±200mA@+6dBm input | Alarm range: Out of 1000mA~3300mA |
| Laser Bias Current | Pump | 16*19dBm 3100mA±200mA@6dBm input | Alarm range: Out of 1500mA~4800mA |
| Output Optical Power Stability | dB | 0.1 | @+6dBm Input |
| Noise Figure | dB | 4(max 5.8) | @+6dBm Input |
| Isolation (Input/Output) | dB | 30 |
|
| Return Loss (Input/Output) | dB | 55 |
|
| Polarization Dependent Gain | dB | max 0.5 |
|
| Polarization Mode Dispersion | ps | max 0.5 |
|
| 1550nm internal Transmitter specifications | |||
| Optical Wavelength | nm | 1540 ~1560 |
|
| Laser Type |
|
Cooled DFB LD |
|
| Optical Power | dBm | 4 ~ 10 | Combine with EDFA signal, adjustable or auto adaptive |
| LD RIN | dB/Hz | ≥-160 |
|
| Operating Bandwidth | MHz | 45~862(1000) |
|
| Flatness | dB | ≤±1 |
|
| RF Input Impedance | Ω | 75 |
|
| Number of Channels |
|
≤10 | Local channel |
| Input Return Loss | dB | ≥16 | 45～550 MHz |
| ≥14 | 550～862(1000)MHz | ||
| RF Input Level | dBmV/Ch | 80±5 |
|
| Test Point | dBuv | -20 | Relative input port |
| Connector Type |
|
F type female | F type male option |
| AGC | dB | ±5 | AGC central control point can be set |
| MGC | dB | 10 |
|
| CNR | dBc | 51dB(typical) | PHOTON standard receiver,10km optical fiber , -1dBm optical input power, 80 dB V input level at 870MHz, 3.6% OMI |
| CSO |
|
≤-57 dBc | |
| CTB |
|
≤-63dBc | |
| others | |||
| Electrical Specifications | |||
| Communication Interface |
|
RJ45 | Supporting Web and SNMP NMS |
| Input voltage | VAC | 90-265 | +12/-48 V DC(optional) |
| Consumption | W | 60maximum |
|
| Fuse | A | 2 |
|
| Connector | IEC | Male power connector |
|
| Environmental Specifications | |||
| Operating Temperature | ℃ | -5 ~50 |
|
| Storage Temperature | ℃ | -20 ~85 |
|
| Storage Humidity | RH% | ≤95 | No condensation |
| Mechanical Specifications | |||
| Dimension (LxWxH) | mm | 483 ´ 422 ´ 88 | Carton:590 ´ 590 ´ 200 |
| Weight | kg | Net weight 11.5 gross weight :14.8 | 16 port |
| Mounting |
|
19” EIA rack, 2U Rack |
|
